Category: SANY Batching Plant

HZS180F8 180m³/h Batching Plant

HZS180F8

HZS180F8

180m³/h Batching Plant

Theoretical productivity:
180m³/h
Aggregate silo capacity:
4×25 m³
Powder lot bin capacity:
4×200t

Benefits & Features

Sany HZS180F8 Batching Plant makes the maximum productivity to 180 cubic meter per hour. The 180 cubic meter batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

Rapid Assembly Design

Build and put into operation rapidly. Easy to maintain and move.

Break away from the traditional welded mode of most concrete batching plants and enjoy our modular design. It is quick and convenient to install, easy to maintain and move. The compact footprint and flexibility will meet the requirements of the more complex work sites.

Designed for rapid and convenient installation

New control room, designed to be rapidly relocated.

Modular design of the inclined belt makes it easy to assemble, disassemble and transport. The support uses the open “U” end face and truss structure, thus the belt is simple and quick to install or replace. The toughened rollers effectively solve problems of deviation and adjustment.

The access steps and walkway are made of galvanized grid plate.

The batching station utilizes a new structure with a feeding height that is 200mm lower than that of the C6. This increases the speed and efficiency of the loader, thus saving energy and fuel consumption.

The storage silos use a floor type structure. Installed on the ground and easily built on site using common hardware.

General components convenient maintenance

Mass produced parts allows interchangeability and convenient maintenance.

Flexible to disassemble & assemble convenient to move

The new F8 concrete batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

New era coating (Optional)

Excellent rust prevention lasting protection

Break free of the need to coat on site. Enjoy factory installed hot dipped galvanization anti-corrosion coating to achieve the highest degree of corrosion protection with a service life of 20 years.

Ultrahigh toughness comprehensive protection

The galvanized coating on the components is produced by hot-dipped process that forms a protective structure and effectively prevents damage during transportation and use. All components are completely coated, including crevices and sharp corners.

Quick construction save time and labor

Compared to traditional “coat after build” methods, galvanization at the factory ensures higher quality while saving both time and labor.

Lasting protection benefit for long term

Zinc galvanization anti-rust coating can maintain rust prevention for up to 20 years. The paint costs of up to 150,000 yuan can be saved over the life cycle of the plant.

Energy Efficient

To improve mixing efficiency, the discharge ports of the aggregate silo and powder hopper are arranged in the middle of the mixer.

Production tasks intelligently queue in such a way as to achieve continuous production, improving efficiency by 10%.

The self adapting control integrates environmental protection and leak reduction to increase the discharge rate by 25%.

Intelligent production process control reduces energy consumption by 10%.

To prevent binding associated with material buildup, SANY intelligent cleaning allows cleaning without the need for shutting down the machine periodically. This enhances output and reduces the maintenance workload.

Intelligent control

The fault diagnostic system displays diagnostic messages in real time and displays reminders for maintenance based on operating conditions.

The system can be remotely upgraded to ensure the latest functions are available.

Environmentally friendly

The enclosed feed design significantly reduces environmental impact.

Patented pressure relieving technology for the powder silo effectively collect dust and eliminate the need for roof access.

The optional waste water and waste materials system recycles there valuable materials.

Easy maintenance

The overhaul cover plates and suspension points of the mixer permit convenient maintenance access and component replacement.

The hopper cover plate design provides unprecedented convenience for liner examination and replacement.

The powder hopper has an patented overhaul cap that solves the problem of breather pipe blockage.

The mixer cover is designed with caking prevention features and is configured with multiple manholes for convenient cleaning.

Specifications

Theoretical productivity
180 m³/h
Mixer model
JS3000E
Motor power
2×55 kW
Cycle period
60 s
Nominal capacity of mixer
3000 L
Max.aggregate size
Φ80 mm
Powder lot bin capacity
4×200 t
Aggregate silo capacity
4×25 m³
Category of aggregate
4 (optional)
Material discharging height
4 m (optional)
Installed capacity
250 kW
Accuracy of aggregate
±2% kg
Accuracy of cement
±1% kg
Accuracy of fly ash
±1% kg
Accuracy of water
±1% kg
Accuracy of addtive
±1% kg
Standard reference weight
101 kg
Charging mode
Inclined Belt Type
Electricity standard
380V/50Hz

HZS120F8 120m³/h Batching Plant

HZS120F8

HZS120F8

120m³/h Batching Plant

Theoretical productivity:
120m³/h
Aggregate silo capacity:
4×17 m³
Powder lot bin capacity:
4×200t

Benefits & Features

Sany HZS120F8 Batching Plant makes the maximum productivity 120 cubic meter per hour. The 120 cubic meter batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

Rapid Assembly Design

Build and put into operation rapidly. Easy to maintain and move.

Break away from the traditional welded mode of most concrete batching plants and enjoy our modular design. It is quick and convenient to install, easy to maintain and move. The compact footprint and flexibility will meet the requirements of the more complex work sites.

Designed for rapid and convenient installation

New control room, designed to be rapidly relocated.

Modular design of the inclined belt makes it easy to assemble, disassemble and transport. The support uses the open “U” end face and truss structure, thus the belt is simple and quick to install or replace. The toughened rollers effectively solve problems of deviation and adjustment.

The access steps and walkway are made of galvanized grid plate.

The batching station utilizes a new structure with a feeding height that is 200mm lower than that of the C6. This increases the speed and efficiency of the loader, thus saving energy and fuel consumption.

The storage silos use a floor type structure. Installed on the ground and easily built on site using common hardware.

General components convenient maintenance

Mass produced parts allows interchangeability and convenient maintenance.

Flexible to disassemble & assemble convenient to move

The new F8 concrete batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

New era coating (Optional)

Excellent rust prevention lasting protection

Break free of the need to coat on site. Enjoy factory installed hot dipped galvanization anti-corrosion coating to achieve the highest degree of corrosion protection with a service life of 20 years.

Ultrahigh toughness comprehensive protection

The galvanized coating on the components is produced by hot-dipped process that forms a protective structure and effectively prevents damage during transportation and use. All components are completely coated, including crevices and sharp corners.

Quick construction save time and labor

Compared to traditional “coat after build” methods, galvanization at the factory ensures higher quality while saving both time and labor.

Lasting protection benefit for long term

Zinc galvanization anti-rust coating can maintain rust prevention for up to 20 years. The paint costs of up to 150,000 yuan can be saved over the life cycle of the plant.

Energy Efficient

To improve mixing efficiency, the discharge ports of the aggregate silo and powder hopper are arranged in the middle of the mixer.

Production tasks intelligently queue in such a way as to achieve continuous production, improving efficiency by 10%.

The self adapting control integrates environmental protection and leak reduction to increase the discharge rate by 25%.

Intelligent production process control reduces energy consumption by 10%.

To prevent binding associated with material buildup, SANY intelligent cleaning allows cleaning without the need for shutting down the machine periodically. This enhances output and reduces the maintenance workload.

Intelligent control

The fault diagnostic system displays diagnostic messages in real time and displays reminders for maintenance based on operating conditions.

The system can be remotely upgraded to ensure the latest functions are available.

Environmentally friendly

The enclosed feed design significantly reduces environmental impact.

Patented pressure relieving technology for the powder silo effectively collect dust and eliminate the need for roof access.

The optional waste water and waste materials system recycles there valuable materials.

Easy maintenance

The overhaul cover plates and suspension points of the mixer permit convenient maintenance access and component replacement.

The hopper cover plate design provides unprecedented convenience for liner examination and replacement.

The powder hopper has an patented overhaul cap that solves the problem of breather pipe blockage.

The mixer cover is designed with caking prevention features and is configured with multiple manholes for convenient cleaning.

Specifications

Theoretical productivity
120 m3/h
Mixer model
JS2000CK
Motor power
2×37 kW
Cycle period
60 s
Nominal capacity of mixer
2000 L
Max.aggregate size
Φ80 mm
Powder lot bin capacity
4×200 t
Aggregate silo capacity
4×17 m³
Category of aggregate
4 (optional)
Material discharging height
4 m (optional)
Installed capacity
210 kW
Accuracy of aggregate
±2% kg
Accuracy of cement
±1% kg
Accuracy of fly ash
±1% kg
Accuracy of water
±1% kg
Accuracy of addtive
±1% kg
Standard reference weight
93 kg
Charging mode
Inclined Belt Type
Electricity standard
380V/50Hz

HZS90F8 90m³/h Batching Plant

HZS90F8

HZS90F8

90m³/h Batching Plant

Theoretical productivity:
90m³/h
Aggregate silo capacity:
3×17 m³
Powder lot bin capacity:
3×100t

Benefits & Features

Sany HZS90F8 Batching Plant makes the maximum productivity to 90 cubic meter per hour. The 90 cubic meter batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

Rapid Assembly Design

Build and put into operation rapidly. Easy to maintain and move.

Break away from the traditional welded mode of most concrete batching plants and enjoy our modular design. It is quick and convenient to install, easy to maintain and move. The compact footprint and flexibility will meet the requirements of the more complex work sites.

Designed for rapid and convenient installation

New control room, designed to be rapidly relocated.

Modular design of the inclined belt makes it easy to assemble, disassemble and transport. The support uses the open “U” end face and truss structure, thus the belt is simple and quick to install or replace. The toughened rollers effectively solve problems of deviation and adjustment.

The access steps and walkway are made of galvanized grid plate.

The batching station utilizes a new structure with a feeding height that is 200mm lower than that of the C6. This increases the speed and efficiency of the loader, thus saving energy and fuel consumption.

The storage silos use a floor type structure. Installed on the ground and easily built on site using common hardware.

General components convenient maintenance

Mass produced parts allows interchangeability and convenient maintenance.

Flexible to disassemble & assemble convenient to move

The new F8 concrete batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

New era coating (Optional)

Excellent rust prevention lasting protection

Break free of the need to coat on site. Enjoy factory installed hot dipped galvanization anti-corrosion coating to achieve the highest degree of corrosion protection with a service life of 20 years.

Ultrahigh toughness comprehensive protection

The galvanized coating on the components is produced by hot-dipped process that forms a protective structure and effectively prevents damage during transportation and use. All components are completely coated, including crevices and sharp corners.

Quick construction save time and labor

Compared to traditional “coat after build” methods, galvanization at the factory ensures higher quality while saving both time and labor.

Lasting protection benefit for long term

Zinc galvanization anti-rust coating can maintain rust prevention for up to 20 years. The paint costs of up to 150,000 yuan can be saved over the life cycle of the plant.

 

Specifications

Theoretical productivity
90 m³/h
Mixer model
JS1500
Motor power
2×30 kW
Cycle period
60 s
Nominal capacity of mixer
1500 L
Max.aggregate size
¢80 mm
Powder lot bin capacity
3×100 t
Aggregate silo capacity
3×17 m³
Category of aggregate
3 (optional)
Material discharging height
4 m (optional)
Installed capacity
200 kW
Accuracy of aggregate
±2% kg
Accuracy of cement
±1% kg
Accuracy of fly ash
±1% kg
Accuracy of water
±1% kg
Accuracy of addtive
±1% kg
Standard reference weight
68 kg
Charging mode
Inclined Belt Type
Electricity standard
380V/50Hz

HZS90V8 75m³/h Batching Plant

HZS90V8

HZS90V8

75m³/h Batching Plant

Theoretical productivity:
75m³/h
Aggregate silo capacity:
3×10 m³
Powder lot bin capacity:
2×100t

Sany HZS90V8 Batching Plant makes the maximum productivity to 75 cubic meter per hour. The 75 cubic meter batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

Stable & Reliable

6 step protection system ensures safety during operation

Ethernet connections for fast and reliable communications

Computer controlled manufacturing process

Small & Flexible

Small footprint requires less site space

Enter and exit on both sides. Flexible layout allows setup on any site

Convenient & Fast

Modular design allows an installation time of only 4 days

Major components can be quickly and easily relocated

Cost Effective

Lower initial investment for quicker profits

Lower aggregate capacity for lower energy consumption

Lower loader fuel consumption results lower operating costs

 

Theoretical productivity
75 m³/h
Mixer model
JS1500
Motor power
2×30 kW
Cycle period
72 s
Nominal capacity of mixer
1500 L
Max.aggregate size
¢80 mm
Powder lot bin capacity
2×100 t
Aggregate silo capacity
3×10 m³
Category of aggregate
3 (optional)
Material discharging height
4 m (optional)
Installed capacity
140 kW
Accuracy of aggregate
±2% kg
Accuracy of cement
±1% kg
Accuracy of fly ash
±1% kg
Accuracy of water
±1% kg
Accuracy of addtive
±1% kg
Standard reference weight
38 kg
Charging mode
Bucket Elevator
Electricity standard
380V/50Hz

HZS60F 60m³/h Batching Plant

HZS60F

60m³/h Batching Plant

Theoretical productivity:
60m³/h
Aggregate silo capacity:
3×10 m³
Powder lot bin capacity:
2×50t
Theoretical productivity
60 m³/h
Mixer model
JS1000
Motor power
2×18.5 kW
Cycle period
60 s
Nominal capacity of mixer
1000 L
Max.aggregate size
Φ60 mm
Powder lot bin capacity
2×50 t
Aggregate silo capacity
3×10 m³
Category of aggregate
3 (optional)
Material discharging height
4 m (optional)
Installed capacity
100 kW
Accuracy of aggregate
±2% kg
Accuracy of cement
±1% kg
Accuracy of fly ash
±1% kg
Accuracy of water
±1% kg
Accuracy of addtive
±1% kg
Standard reference weight
40 kg
Charging mode
Bucket Elevator/ Inclined Belt Type
Electricity standard
380V/50Hz

HZS60V8 50m³/h Batching Plant

HZS60V8

HZS60V8

50m³/h Batching Plant

Theoretic productivity:
50m³/h
Aggregate silo capacity:
3×9 m³
Powder lot bin capacity:
2×50t

Sany HZS60V8 Batching Plant makes the maximum productivity to 50 cubic meter per hour. The 50 cubic meter batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

Stable & Reliable

6 step protection system ensures safety during operation

Ethernet connections for fast and reliable communications

Computer controlled manufacturing process

Small & Flexible

Small footprint requires less site space

Enter and exit on both sides. Flexible layout allows setup on any site

Convenient & Fast

Modular design allows an installation time of only 4 days

Major components can be quickly and easily relocated

Cost Effective

Lower initial investment for quicker profits

Lower aggregate capacity for lower energy consumption

Lower loader fuel consumption results lower operating costs

Specifications

Theoretical productivity
50 m3/h
Mixer model
JS1000
Motor power
37 kW
Cycle period
72 s
Nominal capacity of mixer
1000 L
Max.aggregate size
Φ60 mm
Powder lot bin capacity
2×50 t
Aggregate silo capacity
3×9 m³
Category of aggregate
3 (optional)
Material discharging height
4 m (optional)
Installed capacity
80 kW
Accuracy of aggregate
±2% kg
Accuracy of cement
±1% kg
Accuracy of fly ash
±1% kg
Accuracy of water
±1% kg
Accuracy of addtive
±1% kg
Standard reference weight
30 kg
Charging mode
Bucket Elevator
Electricity standard
380V/50Hz

HZS30V8 26m³/h Batching Plant

HZS30V8
HZS30V8

26m³/h Batching Plant

Theoretical productivity:
26m³/h
Aggregate silo capacity:
3×7 m³
Powder lot bin capacity:
1×50t

Sany HZS30V8 Batching Plant makes the maximum productivity 26 cubic meter per hour. The 26 cubic meter batching plant adopts a modular structure that can be assembled and disassembled rapidly using common hardware. This makes it convenient to move.

Stable & Reliable

6 step protection system ensures safety during operation

Ethernet connections for fast and reliable communications

Computer controlled manufacturing process

Small & Flexible

Small footprint requires less site space

Enter and exit on both sides. Flexible layout allows setup on any site

Convenient & Fast

Modular design allows an installation time of only 4 days

Major components can be quickly and easily relocated

Cost Effective

Lower initial investment for quicker profits

Lower aggregate capacity for lower energy consumption

Lower loader fuel consumption results lower operating costs

Specifications

Theoretical productivity
26 m³/h
Mixer model
JS500
Motor power
18.5 kW
Cycle period
67 s
Nominal capacity of mixer
500 L
Max.aggregate size
Φ60 mm
Powder lot bin capacity
1×50 t
Aggregate silo capacity
3×7 m³
Category of aggregate
3 (optional)
Material discharging height
4 m (optional)
Installed capacity
60 kW
Accuracy of aggregate
±2% kg
Accuracy of cement
±1% kg
Accuracy of fly ash
±1% kg
Accuracy of water
±1% kg
Accuracy of addtive
±1% kg
Standard reference weight
20 kg
Charging mode
Bucket Elevator
Electricity standard
380V/50Hz